Share

Quick Mortar and Plaster Mixes
7 - 15 Mpa

Superior quality wet mortar and plaster mixes with 10 hours open-time and added Micro Fibres to prevent drying shrinkage cracking in the plastering concrete.

7 - 15 Mpa Wet Mortar & Plaster
8- 12 Hours workability Our Quick Mortar and Plaster Mix range is designed with the finest washed plaster sand and Additives to achieve consistent workable and strength characteristics and with added polypropylene microfibres to prevent drying shrinkage cracks in harsh ambient conditions.
Our QUICK - Mortar and Plaster range is retarded for up to 8 - 12 hours, ensuring a workable product for the day’s mortar or plasterwork to be done without adding water to the mix. Little mixing is required if covered with plastic or kept in our enclosed mortar bin available on request.
  • Available Strengths :7Mpa - 15Mpa
  • Cement Type :CEM11 42.5R
  • Sand Used :Finest Washed Plaster Sand
  • Mix Composition :70/30 - Cement/Fly Ash
  • Additives Used :Plasticizers and Retarders
  • Slump :200mm
  • Discharge Method : From Chute of Vehicle
  • Total Chute Length : 4.5 Metre
  • Load Sizes : min 1m³ - Max 5m³
0
1

standard concrete mix

Product Info:

Product Design

Consistent quality is ensured, as raw materials are mixed in the correct proportions to achieve consistent workable and strength characteristics. QUICK - Mortar and Plaster mixes are mixed according to national specifications. No addition of water or other materials is required on site.

Our QUICK - Mortar and Plaster range is retarded for up to 8 - 12 hours, ensuring a workable product for the day’s mortar or plaster work to be done without adding water to the mix. Little mixing is required if covered with plastic or kept in our enclosed mortar bin available on request.

Polypropylene Fiber is added to Plaster Mixes to prevent plastic shrinkage cracking in harsh weather conditions. It is still advisable to cure plaster by wetting and covering in harsh ambient weather conditions.

Benefits:
  • ◘ Consistent plaster finish
  • ◘ Improved production rate as no mixing is required
  • ◘ 8 - 12 Hours workability
  • ◘ No space needed for sand and cement storage
  • ◘ No cement theft
  • ◘ Fibres prevent cracks in harsh ambient conditions
  • ◘ 1m³ can plaster guaranteed 40m² on 25mm plaster thickness and waste included.
General Applications
  • ◘ Interior Plaster - (7 Mpa) Micro Fibre added to prevent drying shrinkage cracks
  • ◘ Exterior Plaster - (10 Mpa ) - Micro Fibre added to prevent drying shrinkage cracks
  • ◘ Interior Non-load bearing walls - (7 Mpa Quick Mortar)
  • ◘ Interior Load bearing walls - (10 - 15 Mpa)
  • ◘ Soft Natural Stone Masonry - (10 Mpa)
  • ◘ Foundation Wall Masonry - (10 Mpa)
  • ◘ Below Grade Masonry - (10 - 15 Mpa)
Discharge Method

Concrete is discharged straight from the vehicle's chute into 1m3 Flow bins that we can supply for the duruation of the project. Mortar and Plaster Mixes can also be discharged on a Plastic PVC sheet, big enough to fold close to prevent rapid evaporation of moisture. It is advisable to create a container, plastic sheet or area that wil prevent the Quick Plaster or Mortar to be contaminated with other material and stones.

The 1m3 flow bin containers available on request works extremely well. 1m3 flow bin can cover 40m2 of plastering and we can deliver as many containers as is needed and spread over the construction site where the Mortar or plaster will be applied.

How to Order:

To order concrete you will need the following information:
1. Strength required
2. Volume(m³) Required
3. Delivery Address

We will send a quote based on the supplied details. If you are not sure about the volumes required, contact your engineur or architect for this information. You can also view the Volume calculator page. Please remember that it is always wise to measure on site as well and not just calculating based on plan drawings. Excavations, trench depths and surface level can influence the actual volumes required.

Discharge Method:

Concrete is discharged straight from the vehicle's chute into 1m3 Flow bins that we can supply for the duration of the project. Mortar and Plaster Mixes can also be discharged on a Plastic PVC sheet, big enough to fold close to prevent rapid evaporation of moisture. It is advisable to create a container, plastic sheet or area that will prevent the Quick Plaster or Mortar to be contaminated with other materials and stones.



The 1m3 flow bin containers available on request works extremely well. 1m3 flow bin can cover 40m2 of plastering with plaster depths of 25mm and we can deliver as many containers as needed and can spread the containers over the construction site where the Mortar or plaster will be applied.

Dimensions for safe access

Back to products
© WindowSeat Media 2019 / All rights reserved.
Back to top